go-eCharger HOME+ 11kW Standard, mobile wallbox


One of the smallest wallbox on the market with 11 kW for charging electric vehicles at home, company parking lots and on the road with built-in type 2 socket and CEE red 16 A plug for direct connection to the corresponding three-phase socket.

Optional adapters for other sockets are available. Please ensure that you order suitable adapters specifically for the go-eCharger HOME+ 11 kW.



The go-eCharger HOME+ 11 kW is a mobile wallbox for charging electric vehicles, which can also be transformed into a mobile charging station in a few seconds. It is suitable for garages and outdoor parking areas, e.g. in front of residential buildings and companies (without selling charging current). The mobile wallbox can be connected directly to an existing CEE 16 A three-phase socket or to other sockets via an adapter.

The charging station with a maximum charging capacity of 11 kW is equipped with numerous intelligent functions at no extra cost. Our principle for the go-eCharger HOME + 11 kW –  fully equipped at an unbeatable price-performance ratio. In addition to extensive security functions such as phase detection, grounding measurement or adapter detection, the box is equipped with RFID for access control and WLAN with hotspot function and can therefore be personalized and updated via the corresponding app. PV connection via the API interface, load balancing and electricity price exchange connection is also part of the functional scope.

Scope of delivery:

  • Charging station 11 kW* with 16 A CEE plug
  • Wall mount including screws and dowels
  • Optionally mountable cable protection (anti-theft protection)
  • One reset card and one RFID chip
  • One spare special fine fuse
  • Short instructions

Product specifications:

  • Dimensions: approx. 15 x 25 x 9 cm
  • Weight: approx. 2.0 kg
  • Connection cable: 30 cm + plug

Charging Capacity:

  • Maximum charging power 11 kW (16 A, 3-phase)
  • Charging power adjustable between 1.4 kW and 11 kW [depending on the number of phases (1-, 2- or 3-phase) and selected amperes (adjustable in 1-ampere steps between 6 A and 16 A)]

Connection on vehicle side:

  • CEE red 16 A (three-phase)
  • With optional adapters (not included in delivery):
    • 11 kW HOME+ to CEE red 32 A (three-phase – limitation by charging box to 16 A)
    • 11 kW HOME+ to CEE blue 16 A (single-phase)
    • 11 kW HOME+ to multiple domestic plugs 16 A (household socket outlet)

Connection on vehicle side:

  • Type 2 socket, own type 2 cable required (not included in delivery)
  • Locking device (theft protection)
  • Vehicles with type 1 can be charged with an adapter cable
  • Ampere and charging status readable via an LED ring or app
  • Charging power adjustable via button and app

Safety functions:

  • RFID access control
  • RCD protection device with DC detection, 30 mA AC, 6 mA DC
  • Phase and voltage test of the input voltage
  • Phase test after the contactor
  • Current sensor three-phase
  • Ground check (switchable grounding monitoring)
  • Customer replaceable fine fuse for internal electronics (triggers if the supply line is connected incorrectly)
  • IP54 – Protection against dirt and water, suitable for permanent outdoor use
  • go-e network operator API for authorized access of the electricity network operator to the go-eCharger for network-related power control

App and connectivity:

  • Local (WLAN hotspot) or worldwide (via home WLAN) usable
  • Charge monitoring (voltage, current, power, energy)
  • Start/stop function
  • RFID card management (up to 10 users per charger)
  • Timer
  • Electricity meter (total kWh and total amount per RFID card)
  • Max Wh Charging
  • Access management (RFID/App)
  • Cable Lock/Unlock functions
  • Electricity price exchange connection with intelligent charge management
  • Load balancing
  • Photovoltaic connection via open API interface (programming required) or go-eController (separate product)
  • LED adjustment
  • Management of the charging levels via a button on the charging box
  • Modbus TCP (firmware version 0.40 or higher) for power control by the electricity network operator
  • Updatable for later functions (Smart Home, etc.)

Shipping weight: 3,50 Kg
Product weight: 2,26 Kg




Additional information

Weight 3.5 kg


There are no reviews yet.

Be the first to review “go-eCharger HOME+ 11kW Standard, mobile wallbox”

Your email address will not be published. Required fields are marked *

Product Enquiry

You may also like…